Arts and engineering groups and collectives in CEE

Czechoslovakia

• Zdeněk Sýkora with Jaroslav Blažek, Prague, since 1966, first computer generated line paintings in 1972
• Jozef Jankovič with Imrich Bertók, Bratislava, since 1966/1973, lithographies and serigraphies based on computer-generated drawings
• Juraj Bartusz with Vladimír Haltenberger, Bratislava, since 1973, manufactured sculptures based on computer-generated curves
• Daniel Fischer with computer engineers Pavol Fischer and Igor Klačanský, Bratislava, since 1975, computer morphing line drawings
• Petr Kotík with Jan Kučera, at Buffalo University, 1971-1983
• Milan Guštar has been providing technical support for the works by David Černý, Silver, Federico Díaz, Miloš Vojtěchovský, Michael Bielický and others since 1987.
• Jaroslav Frič with Josef Svoboda (Polyvision, 1967); Jaroslav Frič with Radúz Činčera (Kinoautomat, 1968)
• Media_art_in_CEE#Electro-acoustic_music_studios_and_societies

more

• Dvizheniye group, Moscow, 1962/64-1976
• Exat 51 group in Zagreb ?
• ARGO group, Russia, early 1970s
• Open form in Poland
• Theremin Center Moscow *1992
• http://societyofalgorithm.org/B22F/01/index.html
• http://societyofalgorithm.org/B22F/04/index.html

Works

• 

  Zdeněk Sýkora, Gray Structure, oil on canvas, 150 x 120 cm, 1962-1963.

• 

  Zdeněk Sýkora, Black-white Structure, oil on canvas, 220 x 110 cm, 1966.

• 

  Zdeněk Sýkora, Black-and-White Structure, ceramic mosaic (detail), 530x350cm, 1969. The composition of the pattern was computed with a program on a LGP-30 (German) computer.

• 

  Zdeněk Sýkora, geometrical elements used in the paintings Black-white Structure.

• 

  Zdeněk Sýkora, the placement of initial elements and the assignment of color density ratings supplied among the instructions to computer for the painting Black-white Structure.

• 

  Zdeněk Sýkora, computer results for the painting Black-white Structure (based on Rule 2, coefficient c = 0.75). Underlined numbers refer to the initial elements.

• 

  Juraj Bartusz, retrospective exhibition in Košice, aluminum art objects from 1973-74. (Photo: Milan Bobula) The objects were made according to computer drawings utilizing boundary curves generated by the HP 9030A computer.

• 

  Miroslav Klivar, Structure II, computer drawing using pen plotter, 21 x 28 cm, 1979. (Collection of the National Gallery of Prague)

• 

  Jozef Jankovič, exterior design for a general hospital in Bratislava IV, colored aluminium and epoxy, 6 x 6 m, 1981-1982. The artwork was created according to computer drawings using the PDP11 computer and the Calcomp plotter. Each column shows the morphing of an outline of part of the human body into an electrocardiograph signal.

• 

  Daniel Fischer, The Cubist's Pictures Can Be Read Like a Modern Poetry, serigraph, 1983. From the series Images-Poems, this artwork was generated by the CDC3000 computer and the Calcomp plotter. The artist used an earlier version of the image to create an oil painting in 1982.

• 

  Jozef Jankovič, interior design at the general hospital in Bratislava III, cast sand and epoxy, 3 x 3 m, 1984-1985. (Photo: Ivan Hoffman) The casting form was produced from computer drawings using the SM4 computer and Calcomp plotter.

• 

  Zdeňka Čechová, offset-printed design, 8.5 x 10 cm, 1986. Čechová made similar computer-generated patterns for textile designs and book illustrations.

• 

  Zdeňka Čechová, Sand Storm, computer drawing, 21 x 28 cm, 1991. This drawing was printed on a dot-matrix printer using the author's program.

Literature

• Martin Šperka, "The Origins of Computer Graphics in the Czech and Slovak Republics", Leonardo, Vol. 27, No. 1 (1994), pp. 45-50 [1]
• Zdeněk Sýkora, Jaroslav Blažek, "Computer-Aided Multi-Element Geometrical Abstract Paintings", Leonardo, Vol. 3, No. 4 (Oct., 1970), pp. 409-413 [2]
• http://www.ekac.org/dialogicimag.html