Introduction
3
I. Photographing a printed book
7
I. Getting the image files ready for post-processing
11
III. Transformation of source images into .tiffs
13
IV. Optical character recognition
16
V. Creating a finalized e-book file
16
VI. Cataloging and sharing the e-book
16
Quick workflow reference for scanning and post-processing
18
References
22
INTRODUCTION:
BOOK SCANNING - FROM PAPER BOOK TO E-BOOK
Initial considerations when deciding on a scanning setup
Book scanning tends to be a fragile and demanding process. Many factors can go wrong or produce
results of varying quality from book to book or page to page, requiring experience or technical skill
to resolve issues that occur. Cameras can fail to trigger, components to communicate, files can get
corrupted in the transfer, storage card doesn't get purged, focus fails to lock, lighting conditions
change. There are trade-offs between the automation that is prone to instability and the robustness
that is prone to become time consuming.
Your initial choice of book scanning setup will have to take these trade-offs into consideration. If
your scanning community is confined to your hacklab, you won't be risking much if technological
sophistication and integration fails to function smoothly. But if you're aiming at a broad community
of users, with varying levels of technological skill and patience, you want to create as much timesaving automation as possible on the condition of keeping maximum stability. Furthermore, if the
time of individual members of your scanning community can contribute is limited, you might also
want to divide some of the tasks between users and their different skill levels.
This manual breaks down the process of digitization into a general description of steps in the
workflow leading from the printed book to a digital e-book, each of which can be in a concrete
situation addressed in various manners depending on the scanning equipment, software, hacking
skills and user skill level that are available to your book scanning project. Several of those steps can
be handled by a single piece of equipment or software, or you might need to use a number of them your mileage will vary. Therefore, the manual will try to indicate the design choices you have in the
process of planning your workflow and should help you make decisions on what design is best for
you situation.
Introducing book scanner designs
The book scanning starts with the capturing of digital image files on the scanning equipment. There
are three principle types of book scanner designs:
flatbed scanner
single camera overhead scanner
dual camera overhead scanner
Conventional flatbed scanners are widely available. However, given that they require the book to be
spread wide open and pressed down with the platen in order to break the resistance of the book
binding and expose sufficiently the inner margin of the text, it is the most destructive approach for
the book, imprecise and slow.
Therefore, book scanning projects across the globe have taken to custom designing improvised
setups or scanner rigs that are less destructive and better suited for fast turning and capturing of
pages. Designs abound. Most include:
•
•
•
one or two digital photo cameras of lesser or higher quality to capture the pages,
transparent V-shaped glass or Plexiglas platen to press the open book against a V-shape
cradle, and
a light source.
The go-to web resource to help you make an informed decision is the DIY book scanning
community at http://diybookscanner.org. A good place to start is their intro
(http://wiki.diybookscanner.org/ ) and scanner build list (http://wiki.diybookscanner.org/scannerbuild-list ).
The book scanners with a single camera are substantially cheaper, but come with an added difficulty
of de-warping the distorted page images due to the angle that pages are photographed at, which can
sometimes be difficult to correct in the post-processing. Hence, in this introductory chapter we'll
focus on two camera designs where the camera lens stands relatively parallel to the page. However,
with a bit of adaptation these instructions can be used to work with any other setup.
The Public Library scanner
In the focus of this manual is the scanner built for the Public Library project, designed by Voja
Antonić (see Illustration 1). The Public Library scanner was built with the immediate use by a wide
community of users in mind. Hence, the principle consideration in designing the Public Library
scanner was less sophistication and more robustness, facility of use and distributed process of
editing.
The board designs can be found here: http://www.memoryoftheworld.org/blog/2012/10/28/ourbeloved-bookscanner. The current iterations are using two Canon 1100 D cameras with the kit lens
Canon EF-S 18-55mm 1:3.5-5.6 IS. Cameras are auto-charging.
Illustration 1: Public Library Scanner
The scanner operates by automatically lowering the Plexiglas platen, illuminating the page and then
triggering camera shutters. The turning of pages and the adjustments of the V-shaped cradle holding
the book are manual.
The scanner is operated by a two-button controller (see Illustration 2). The upper, smaller button
breaks the capture process in two steps: the first click lowers the platen, increases the light level and
allows you to adjust the book or the cradle, the second click triggers the cameras and lifts the platen.
The lower button has
two modes. A quick
click will execute the
whole capture process in
one go. But if you hold
it pressed longer, it will
lower the platen,
allowing you to adjust
the book and the cradle,
and lift it without
triggering cameras when
you press again.
Illustration 2: A two-button controller
More on this manual: steps in the book scanning process
The book scanning process in general can be broken down in six steps, each of which will be dealt
in a separate chapter in this manual:
I. Photographing a printed book
I. Getting the image files ready for post-processing
III. Transformation of source images into .tiffs
IV. Optical character recognition
V. Creating a finalized e-book file
VI. Cataloging and sharing the e-book
A step by step manual for Public Library scanner
This manual is primarily meant to provide a detailed description and step-by-step instructions for an
actual book scanning setup -- based on the Voja Antonić's scanner design described above. This is a
two-camera overhead scanner, currently equipped with two Canon 1100 D cameras with EF-S 1855mm 1:3.5-5.6 IS kit lens. It can scan books of up to A4 page size.
The post-processing in this setup is based on a semi-automated transfer of files to a GNU/Linux
personal computer and on the use of free software for image editing, optical character recognition
and finalization of an e-book file. It was initially developed for the HAIP festival in Ljubljana in
2011 and perfected later at MaMa in Zagreb and Leuphana University in Lüneburg.
Public Library scanner is characterized by a somewhat less automated yet distributed scanning
process than highly automated and sophisticated scanner hacks developed at various hacklabs. A
brief overview of one such scanner, developed at the Hacker Space Bruxelles, is also included in
this manual.
The Public Library scanning process proceeds thus in following discrete steps:
1. creating digital images of pages of a book,
2. manual transfer of image files to the computer for post-processing,
3. automated renaming of files, ordering of even and odd pages, rotation of images and upload to a
cloud storage,
4. manual transformation of source images into .tiff files in ScanTailor
5. manual optical character recognition and creation of PDF files in gscan2pdf
The detailed description of the Public Library scanning process follows below.
The Bruxelles hacklab scanning process
For purposes of comparison, here we'll briefly reference the scanner built by the Bruxelles hacklab
(http://hackerspace.be/ScanBot). It is a dual camera design too. With some differences in hardware functionality
(Bruxelles scanner has automatic turning of pages, whereas Public Library scanner has manual turning of pages), the
fundamental difference between the two is in the post-processing - the level of automation in the transfer of images
from the cameras and their transformation into PDF or DjVu e-book format.
The Bruxelles scanning process is different in so far as the cameras are operated by a computer and the images are
automatically transferred, ordered and made ready for further post-processing. The scanner is home-brew, but the
process is for advanced DIY'ers. If you want to know more on the design of the scanner, contact Michael Korntheuer at
contact@hackerspace.be.
The scanning and post-processing is automated by a single Python script that does all the work
http://git.constantvzw.org/?
p=algolit.git;a=tree;f=scanbot_brussel;h=81facf5cb106a8e4c2a76c048694a3043b158d62;hb=HEAD
The scanner uses two Canon point and shoot cameras. Both cameras are connected to the PC with USB. They both run
PTP/CHDK (Canon Hack Development Kit). The scanning sequence is the following:
1. Script sends CHDK command line instructions to the cameras
2. Script sorts out the incoming files. This part is tricky. There is no reliable way to make a distinction between the left
and right camera, only between which camera was recognized by USB first. So the protocol is to always power up the
left camera first. See the instructions with the source code.
3. Collect images in a PDF file
4. Run script to OCR a .PDF file to plain .TXT file: http://git.constantvzw.org/?
p=algolit.git;a=blob;f=scanbot_brussel/ocr_pdf.sh;h=2c1f24f9afcce03520304215951c65f58c0b880c;hb=HEAD
I. PHOTOGRAPHING A PRINTED BOOK
Technologically the most demanding part of the scanning process is creating digital images of the
pages of a printed book. It's a process that is very different form scanner design to scanner design,
from camera to camera. Therefore, here we will focus strictly on the process with the Public Library
scanner.
Operating the Public Library scanner
0. Before you start:
Better and more consistent photographs lead to a more optimized and faster post-processing and a
higher quality of the resulting digital e-book. In order to guarantee the quality of images, before you
start it is necessary to set up the cameras properly and prepare the printed book for scanning.
a) Loosening the book
Depending on the type and quality of binding, some books tend to be too resistant to opening fully
to reveal the inner margin under the pressure of the scanner platen. It is thus necessary to “break in”
the book before starting in order to loosen the binding. The best way is to open it as wide as
possible in multiple places in the book. This can be done against the table edge if the book is more
rigid than usual. (Warning – “breaking in” might create irreversible creasing of the spine or lead to
some pages breaking loose.)
b) Switch on the scanner
You start the scanner by pressing the main switch or plugging the power cable into the the scanner.
This will also turn on the overhead LED lights.
c) Setting up the cameras
Place the cameras onto tripods. You need to move the lever on the tripod's head to allow the tripod
plate screwed to the bottom of the camera to slide into its place. Secure the lock by turning the lever
all the way back.
If the automatic chargers for the camera are provided, open the battery lid on the bottom of the
camera and plug the automatic charger. Close the lid.
Switch on the cameras using the lever on the top right side of the camera's body and place it into the
aperture priority (Av) mode on the mode dial above the lever (see Illustration 3). Use the main dial
just above the shutter button on the front side of the camera to set the aperture value to F8.0.
Illustration 3: Mode and main dial, focus mode switch, zoom
and focus ring
On the lens, turn the focus mode switch to manual (MF), turn the large zoom ring to set the value
exactly midway between 24 and 35 mm (see Illustration 3). Try to set both cameras the same.
To focus each camera, open a book on the cradle, lower the platen by holding the big button on the
controller, and turn on the live view on camera LCD by pressing the live view switch (see
Illustration 4). Now press the magnification button twice and use the focus ring on the front of the
lens to get a clear image view.
Illustration 4: Live view switch and magnification button
d) Connecting the cameras
Now connect the cameras to the remote shutter trigger cables that can be found lying on each side
of the scanner. They need to be plugged into a small round port hidden behind a protective rubber
cover on the left side of the cameras.
e) Placing the book into the cradle and double-checking the cameras
Open the book in the middle and place it on the cradle. Hold pressed the large button on the
controller to lower the Plexiglas platen without triggering the cameras. Move the cradle so that the
the platen fits into with the middle of the book.
Turn on the live view on the cameras' LED to see if the the pages fit into the image and if the
cameras are positioned parallel to the page.
f) Double-check storage cards and batteries
It is important that both storage cards on cameras are empty before starting the scanning in order
not to mess up the page sequence when merging photos from the left and the right camera in the
post-processing. To double-check, press play button on cameras and erase if there are some photos
left from the previous scan -- this you do by pressing the menu button, selecting the fifth menu from
the left and then select 'Erase Images' -> 'All images on card' -> 'OK'.
If no automatic chargers are provided, double-check on the information screen that batteries are
charged. They should be fully charged before starting with the scanning of a new book.
g) Turn off the light in the room
Lighting conditions during scanning should be as constant as possible, to reduce glare and achieve
maximum quality remove any source of light that might reflect off the Plexiglas platen. Preferably
turn off the light in the room or isolate the scanner with the black cloth provided.
1. Photographing a book
Now you are ready to start scanning. Place the book closed in the cradle and lower the platen by
holding the large button on the controller pressed (see Illustration 2). Adjust the position of the
cradle and lift the platen by pressing the large button again.
To scan you can now either use the small button on the controller to lower the platen, adjust and
then press it again to trigger the cameras and lift the platen. Or, you can just make a short press on
the large button to do it in one go.
ATTENTION: When the cameras are triggered, the shutter sound has to be heard coming
from both cameras. If one camera is not working, it's best to reconnect both cameras (see
Section 0), make sure the batteries are charged or adapters are connected, erase all images
and restart.
A mistake made in the photographing requires a lot of work in the post-processing, so it's
much quicker to repeat the photographing process.
If you make a mistake while flipping pages, or any other mistake, go back and scan from the page
you missed or incorrectly scanned. Note down the page where the error occurred and in the postprocessing the redundant images will be removed.
ADVICE: The scanner has a digital counter. By turning the dial forward and backward, you
can set it to tell you what page you should be scanning next. This should help you avoid
missing a page due to a distraction.
While scanning, move the cradle a bit to the left from time to time, making sure that the tip of Vshaped platen is aligned with the center of the book and the inner margin is exposed enough.
II. GETTING THE IMAGE FILES READY FOR POST-PROCESSING
Once the book pages have been photographed, they have to be transfered to the computer and
prepared for post-processing. With two-camera scanners, the capturing process will result in two
separate sets of images -- odd and even pages -- coming from the left and right cameras respectively
-- and you will need to rename and reorder them accordingly, rotate them into a vertical position
and collate them into a single sequence of files.
a) Transferring image files
For the transfer of files your principle process design choices are either to copy the files by
removing the memory cards from the cameras and copying them to the computer via a card reader
or to transfer them via a USB cable. The latter process can be automated by remote operating your
cameras from a computer, however this can be done only with a certain number of Canon cameras
(http://bit.ly/16xhJ6b) that can be hacked to run the open Canon Hack Development Kit firmware
(http://chdk.wikia.com).
After transferring the files, you want to erase all the image files on the camera memory card, so that
they would not end up messing up the scan of the next book.
b) Renaming image files
As the left and right camera are typically operated in sync, the photographing process results in two
separate sets of images, with even and odd pages respectively, that have completely different file
names and potentially same time stamps. So before you collate the page images in the order how
they appear in the book, you want to rename the files so that the first image comes from the right
camera, the second from the left camera, the third comes again from the right camera and so on.
You probably want to do a batch renaming, where your right camera files start with n and are offset
by an increment of 2 (e.g. page_0000.jpg, page_0002.jpg,...) and your left camera files start with
n+1 and are also offset by an increment of 2 (e.g. page_0001.jpg, page_0003.jpg,...).
Batch renaming can be completed either from your file manager, in command line or with a number
of GUI applications (e.g. GPrename, rename, cuteRenamer on GNU/Linux).
c) Rotating image files
Before you collate the renamed files, you might want to rotate them. This is a step that can be done
also later in the post-processing (see below), but if you are automating or scripting your steps this is
a practical place to do it. The images leaving your cameras will be positioned horizontally. In order
to position them vertically, the images from the camera on the right will have to be rotated by 90
degrees counter-clockwise, the images from the camera on the left will have to be rotated by 90
degrees clockwise.
Batch rotating can be completed in a number of photo-processing tools, in command line or
dedicated applications (e.g. Fstop, ImageMagick, Nautilust Image Converter on GNU/Linux).
d) Collating images into a single batch
Once you're done with the renaming and rotating of the files, you want to collate them into the same
folder for easier manipulation later.
Getting the image files ready for post-processing on the Public Library scanner
In the case of Public Library scanner, a custom C++ script was written by Mislav Stublić to
facilitate the transfer, renaming, rotating and collating of the images from the two cameras.
The script prompts the user to place into the card reader the memory card from the right camera
first, gives a preview of the first and last four images and provides an entry field to create a subfolder in a local cloud storage folder (path: /home/user/Copy).
It transfers, renames, rotates the files, deletes them from the card and prompts the user to replace the
card with the one from the left camera in order to the transfer the files from there and place them in
the same folder. The script was created for GNU/Linux system and it can be downloaded, together
with its source code, from: https://copy.com/nLSzflBnjoEB
If you have other cameras than Canon, you can edit the line 387 of the source file to change to the
naming convention of your cameras, and recompile by running the following command in your
terminal: "gcc scanflow.c -o scanflow -ludev `pkg-config --cflags --libs gtk+-2.0`"
In the case of Hacker Space Bruxelles scanner, this is handled by the same script that operates the cameras that can be
downloaded from: http://git.constantvzw.org/?
p=algolit.git;a=tree;f=scanbot_brussel;h=81facf5cb106a8e4c2a76c048694a3043b158d62;hb=HEAD
III. TRANSFORMATION OF SOURCE IMAGES INTO .TIFFS
Images transferred from the cameras are high definition full color images. You want your cameras
to shoot at the largest possible .jpg resolution in order for resulting files to have at least 300 dpi (A4
at 300 dpi requires a 9.5 megapixel image). In the post-processing the size of the image files needs
to be reduced down radically, so that several hundred images can be merged into an e-book file of a
tolerable size.
Hence, the first step in the post-processing is to crop the images from cameras only to the content of
the pages. The surroundings around the book that were captured in the photograph and the white
margins of the page will be cropped away, while the printed text will be transformed into black
letters on white background. The illustrations, however, will need to be preserved in their color or
grayscale form, and mixed with the black and white text. What were initially large .jpg files will
now become relatively small .tiff files that are ready for optical character recognition process
(OCR).
These tasks can be completed by a number of software applications. Our manual will focus on one
that can be used across all major operating systems -- ScanTailor. ScanTailor can be downloaded
from: http://scantailor.sourceforge.net/. A more detailed video tutorial of ScanTailor can be found
here: http://vimeo.com/12524529.
ScanTailor: from a photograph of a page to a graphic file ready for OCR
Once you have transferred all the photos from cameras to the computer, renamed and rotated them,
they are ready to be processed in the ScanTailor.
1) Importing photographs to ScanTailor
- start ScanTailor and open ‘new project’
- for ‘input directory’ chose the folder where you stored the transferred and renamed photo images
- you can leave ‘output directory’ as it is, it will place your resulting .tiffs in an 'out' folder inside
the folder where your .jpg images are
- select all files (if you followed the naming convention above, they will be named
‘page_xxxx.jpg’) in the folder where you stored the transferred photo images, and click 'OK'
- in the dialog box ‘Fix DPI’ click on All Pages, and for DPI choose preferably '600x600', click
'Apply', and then 'OK'
2) Editing pages
2.1 Rotating photos/pages
If you've rotated the photo images in the previous step using the scanflow script, skip this step.
- Rotate the first photo counter-clockwise, click Apply and for scope select ‘Every other page’
followed by 'OK'
- Rotate the following photo clockwise, applying the same procedure like in the previous step
2.2 Deleting redundant photographs/pages
- Remove redundant pages (photographs of the empty cradle at the beginning and the end of the
book scanning sequence; book cover pages if you don’t want them in the final scan; duplicate pages
etc.) by right-clicking on a thumbnail of that page in the preview column on the right side, selecting
‘Remove from project’ and confirming by clicking on ‘Remove’.
# If you by accident remove a wrong page, you can re-insert it by right-clicking on a page
before/after the missing page in the sequence, selecting 'insert after/before' (depending on which
page you selected) and choosing the file from the list. Before you finish adding, it is necessary to
again go through the procedure of fixing DPI and Rotating.
2.3 Adding missing pages
- If you notice that some pages are missing, you can recapture them with the camera and insert them
manually at this point using the procedure described above under 2.2.
3) Split pages and deskew
Steps ‘Split pages’ and ‘Deskew’ should work automatically. Run them by clicking the ‘Play’ button
under the 'Select content' function. This will do the three steps automatically: splitting of pages,
deskewing and selection of content. After this you can manually re-adjust splitting of pages and deskewing.
4) Selecting content
Step ‘Select content’ works automatically as well, but it is important to revise the resulting selection
manually page by page to make sure the entire content is selected on each page (including the
header and page number). Where necessary, use your pointer device to adjust the content selection.
If the inner margin is cut, go back to 'Split pages' view and manually adjust the selected split area. If
the page is skewed, go back to 'Deskew' and adjust the skew of the page. After this go back to
'Select content' and readjust the selection if necessary.
This is the step where you do visual control of each page. Make sure all pages are there and
selections are as equal in size as possible.
At the bottom of thumbnail column there is a sort option that can automatically arrange pages by
the height and width of the selected content, making the process of manual selection easier. The
extreme differences in height should be avoided, try to make selected areas as much as possible
equal, particularly in height, across all pages. The exception should be cover and back pages where
we advise to select the full page.
5) Adjusting margins
For best results select in the previous step content of the full cover and back page. Now go to the
'Margins' step and set under Margins section both Top, Bottom, Left and Right to 0.0 and do 'Apply
to...' → 'All pages'.
In Alignment section leave 'Match size with other pages' ticked, choose the central positioning of
the page and do 'Apply to...' → 'All pages'.
6) Outputting the .tiffs
Now go to the 'Output' step. Ignore the 'Output Resolution' section.
Next review two consecutive pages from the middle of the book to see if the scanned text is too
faint or too dark. If the text seems too faint or too dark, use slider Thinner – Thicker to adjust. Do
'Apply to' → 'All pages'.
Next go to the cover page and select under Mode 'Color / Grayscale' and tick on 'White Margins'.
Do the same for the back page.
If there are any pages with illustrations, you can choose the 'Mixed' mode for those pages and then
under the thumb 'Picture Zones' adjust the zones of the illustrations.
Now you are ready to output the files. Just press 'Play' button under 'Output'. Once the computer is
finished processing the images, just do 'File' → 'Save as' and save the project.
IV. OPTICAL CHARACTER RECOGNITION
Before the edited-down graphic files are finalized as an e-book, we want to transform the image of
the text into an actual text that can be searched, highlighted, copied and transformed. That
functionality is provided by Optical Character Recognition. This a technically difficult task dependent on language, script, typeface and quality of print - and there aren't that many OCR tools
that are good at it. There is, however, a relatively good free software solution - Tesseract
(http://code.google.com/p/tesseract-ocr/) - that has solid performance, good language data and can
be trained for an even better performance, although it has its problems. Proprietary solutions (e.g.
Abby FineReader) sometimes provide superior results.
Tesseract supports as input format primarily .tiff files. It produces a plain text file that can be, with
the help of other tools, embedded as a separate layer under the original graphic image of the text in
a PDF file.
With the help of other tools, OCR can be performed also against other input files, such as graphiconly PDF files. This produces inferior results, depending again on the quality of graphic files and
the reproduction of text in them. One such tool is a bashscript to OCR a ODF file that can be found
here: https://github.com/andrecastro0o/ocr/blob/master/ocr.sh
As mentioned in the 'before scanning' section, the quality of the original book will influence the
quality of the scan and thus the quality of the OCR. For a comparison, have a look here:
http://www.paramoulipist.be/?p=1303
Once you have your .txt file, there is still some work to be done. Because OCR has difficulties to
interpret particular elements in the lay-out and fonts, the TXT file comes with a lot of errors.
Recurrent problems are:
- combinations of specific letters in some fonts (it can mistake 'm' for 'n' or 'I' for 'i' etc.);
- headers become part of body text;
- footnotes are placed inside the body text;
- page numbers are not recognized as such.
V. CREATING A FINALIZED E-BOOK FILE
After the optical character recognition has been completed, the resulting text can be merged with
the images of pages and output into an e-book format. While increasingly the proper e-book file
formats such as ePub have been gaining ground, PDFs still remain popular because many people
tend to read on their computers, and they retain the original layout of the book on paper including
the absolute pagination needed for referencing in citations. DjVu is also an option, as an alternative
to PDF, used because of its purported superiority, but it is far less popular.
The export to PDF can be done again with a number of tools. In our case we'll complete the optical
character recognition and PDF export in gscan2pdf. Again, the proprietary Abbyy FineReader will
produce a bit smaller PDFs.
If you prefer to use an e-book format that works better with e-book readers, obviously you will have
to remove some of the elements that appear in the book - headers, footers, footnotes and pagination.
This can be done earlier in the process of cropping down the original .jpg image files (see under III)
or later by transforming the PDF files. This can be done in Calibre (http://calibre-ebook.com) by
converting the PDF into an ePub, where it can be further tweaked to better accommodate or remove
the headers, footers, footnotes and pagination.
Optical character recognition and PDF export in Public Library workflow
Optical character recognition with the Tesseract engine can be performed on GNU/Linux by a
number of command line and GUI tools. Much of those tools exist also for other operating systems.
For the users of the Public Library workflow, we recommend using gscan2pdf application both for
the optical character recognition and the PDF or DjVu export.
To do so, start gscan2pdf and open your .tiff files. To OCR them, go to 'Tools' and select 'OCR'. In
the dialog box select the Tesseract engine and your language. 'Start OCR'. Once the OCR is
finished, export the graphic files and the OCR text to PDF by selecting 'Save as'.
However, given that sometimes the proprietary solutions produce better results, these tasks can also
be done, for instance, on the Abbyy FineReader running on a Windows operating system running
inside the Virtual Box. The prerequisites are that you have both Windows and Abbyy FineReader
you can install in the Virtual Box. If using Virtual Box, once you've got both installed, you need to
designate a shared folder in your Virtual Box and place the .tiff files there. You can now open them
from the Abbyy FineReader running in the Virtual Box, OCR them and export them into a PDF.
To use Abbyy FineReader transfer the output files in your 'out' out folder to the shared folder of the
VirtualBox. Then start the VirtualBox, start Windows image and in Windows start Abbyy
FineReader. Open the files and let the Abbyy FineReader read the files. Once it's done, output the
result into PDF.
VI. CATALOGING AND SHARING THE E-BOOK
Your road from a book on paper to an e-book is complete. If you want to maintain your library you
can use Calibre, a free software tool for e-book library management. You can add the metadata to
your book using the existing catalogues or you can enter metadata manually.
Now you may want to distribute your book. If the work you've digitized is in the public domain
(https://en.wikipedia.org/wiki/Public_domain), you might consider contributing it to the Gutenberg
project
(http://www.gutenberg.org/wiki/Gutenberg:Volunteers'_FAQ#V.1._How_do_I_get_started_as_a_Pr
oject_Gutenberg_volunteer.3F ), Wikibooks (https://en.wikibooks.org/wiki/Help:Contributing ) or
Arhive.org.
If the work is still under copyright, you might explore a number of different options for sharing.
QUICK WORKFLOW REFERENCE FOR SCANNING AND
POST-PROCESSING ON PUBLIC LIBRARY SCANNER
I. PHOTOGRAPHING A PRINTED BOOK
0. Before you start:
- loosen the book binding by opening it wide on several places
- switch on the scanner
- set up the cameras:
- place cameras on tripods and fit them tigthly
- plug in the automatic chargers into the battery slot and close the battery lid
- switch on the cameras
- switch the lens to Manual Focus mode
- switch the cameras to Av mode and set the aperture to 8.0
- turn the zoom ring to set the focal length exactly midway between 24mm and 35mm
- focus by turning on the live view, pressing magnification button twice and adjusting the
focus to get a clear view of the text
- connect the cameras to the scanner by plugging the remote trigger cable to a port behind a
protective rubber cover on the left side of the cameras
- place the book into the crade
- double-check storage cards and batteries
- press the play button on the back of the camera to double-check if there are images on the
camera - if there are, delete all the images from the camera menu
- if using batteries, double-check that batteries are fully charged
- switch off the light in the room that could reflect off the platen and cover the scanner with the
black cloth
1. Photographing
- now you can start scanning either by pressing the smaller button on the controller once to
lower the platen and adjust the book, and then press again to increase the light intensity, trigger the
cameras and lift the platen; or by pressing the large button completing the entire sequence in one
go;
- ATTENTION: Shutter sound should be coming from both cameras - if one camera is not
working, it's best to reconnect both cameras, make sure the batteries are charged or adapters
are connected, erase all images and restart.
- ADVICE: The scanner has a digital counter. By turning the dial forward and backward,
you can set it to tell you what page you should be scanning next. This should help you to
avoid missing a page due to a distraction.
II. Getting the image files ready for post-processing
- after finishing with scanning a book, transfer the files to the post-processing computer
and purge the memory cards
- if transferring the files manually:
- create two separate folders,
- transfer the files from the folders with image files on cards, using a batch
renaming software rename the files from the right camera following the convention
page_0001.jpg, page_0003.jpg, page_0005.jpg... -- and the files from the left camera
following the convention page_0002.jpg, page_0004.jpg, page_0006.jpg...
- collate image files into a single folder
- before ejecting each card, delete all the photo files on the card
- if using the scanflow script:
- start the script on the computer
- place the card from the right camera into the card reader
- enter the name of the destination folder following the convention
"Name_Surname_Title_of_the_Book" and transfer the files
- repeat with the other card
- script will automatically transfer the files, rename, rotate, collate them in proper
order and delete them from the card
III. Transformation of source images into .tiffs
ScanTailor: from a photograph of page to a graphic file ready for OCR
1) Importing photographs to ScanTailor
- start ScanTailor and open ‘new project’
- for ‘input directory’ chose the folder where you stored the transferred photo images
- you can leave ‘output directory’ as it is, it will place your resulting .tiffs in an 'out' folder
inside the folder where your .jpg images are
- select all files (if you followed the naming convention above, they will be named
‘page_xxxx.jpg’) in the folder where you stored the transferred photo images, and click
'OK'
- in the dialog box ‘Fix DPI’ click on All Pages, and for DPI choose preferably '600x600',
click 'Apply', and then 'OK'
2) Editing pages
2.1 Rotating photos/pages
If you've rotated the photo images in the previous step using the scanflow script, skip this step.
- rotate the first photo counter-clockwise, click Apply and for scope select ‘Every other
page’ followed by 'OK'
- rotate the following photo clockwise, applying the same procedure like in the previous
step
2.2 Deleting redundant photographs/pages
- remove redundant pages (photographs of the empty cradle at the beginning and the end;
book cover pages if you don’t want them in the final scan; duplicate pages etc.) by rightclicking on a thumbnail of that page in the preview column on the right, selecting ‘Remove
from project’ and confirming by clicking on ‘Remove’.
# If you by accident remove a wrong page, you can re-insert it by right-clicking on a page
before/after the missing page in the sequence, selecting 'insert after/before' and choosing the file
from the list. Before you finish adding, it is necessary to again go the procedure of fixing DPI and
rotating.
2.3 Adding missing pages
- If you notice that some pages are missing, you can recapture them with the camera and
insert them manually at this point using the procedure described above under 2.2.
3)
Split pages and deskew
- Functions ‘Split Pages’ and ‘Deskew’ should work automatically. Run them by
clicking the ‘Play’ button under the 'Select content' step. This will do the three steps
automatically: splitting of pages, deskewing and selection of content. After this you can
manually re-adjust splitting of pages and de-skewing.
4)
Selecting content and adjusting margins
- Step ‘Select content’ works automatically as well, but it is important to revise the
resulting selection manually page by page to make sure the entire content is selected on
each page (including the header and page number). Where necessary use your pointer device
to adjust the content selection.
- If the inner margin is cut, go back to 'Split pages' view and manually adjust the selected
split area. If the page is skewed, go back to 'Deskew' and adjust the skew of the page. After
this go back to 'Select content' and readjust the selection if necessary.
- This is the step where you do visual control of each page. Make sure all pages are there
and selections are as equal in size as possible.
- At the bottom of thumbnail column there is a sort option that can automatically arrange
pages by the height and width of the selected content, making the process of manual
selection easier. The extreme differences in height should be avoided, try to make
selected areas as much as possible equal, particularly in height, across all pages. The
exception should be cover and back pages where we advise to select the full page.
5) Adjusting margins
- Now go to the 'Margins' step and set under Margins section both Top, Bottom, Left and
Right to 0.0 and do 'Apply to...' → 'All pages'.
- In Alignment section leave 'Match size with other pages' ticked, choose the central
positioning of the page and do 'Apply to...' → 'All pages'.
6) Outputting the .tiffs
- Now go to the 'Output' step.
- Review two consecutive pages from the middle of the book to see if the scanned text is
too faint or too dark. If the text seems too faint or too dark, use slider Thinner – Thicker to
adjust. Do 'Apply to' → 'All pages'.
- Next go to the cover page and select under Mode 'Color / Grayscale' and tick on 'White
Margins'. Do the same for the back page.
- If there are any pages with illustrations, you can choose the 'Mixed' mode for those
pages and then under the thumb 'Picture Zones' adjust the zones of the illustrations.
- To output the files press 'Play' button under 'Output'. Save the project.
IV. Optical character recognition & V. Creating a finalized e-book file
If using all free software:
1) open gscan2pdf (if not already installed on your machine, install gscan2pdf from the
repositories, Tesseract and data for your language from https://code.google.com/p/tesseract-ocr/)
- point gscan2pdf to open your .tiff files
- for Optical Character Recognition, select 'OCR' under the drop down menu 'Tools',
select the Tesseract engine and your language, start the process
- once OCR is finished and to output to a PDF, go under 'File' and select 'Save', edit the
metadata and select the format, save
If using non-free software:
2) open Abbyy FineReader in VirtualBox (note: only Abby FineReader 10 installs and works with some limitations - under GNU/Linux)
- transfer files in the 'out' folder to the folder shared with the VirtualBox
- point it to the readied .tiff files and it will complete the OCR
- save the file
REFERENCES
For more information on the book scanning process in general and making your own book scanner
please visit:
DIY Book Scanner: http://diybookscannnner.org
Hacker Space Bruxelles scanner: http://hackerspace.be/ScanBot
Public Library scanner: http://www.memoryoftheworld.org/blog/2012/10/28/our-belovedbookscanner/
Other scanner builds: http://wiki.diybookscanner.org/scanner-build-list
For more information on automation:
Konrad Voeckel's post-processing script (From Scan to PDF/A):
http://blog.konradvoelkel.de/2013/03/scan-to-pdfa/
Johannes Baiter's automation of scanning to PDF process: http://spreads.readthedocs.org
For more information on applications and tools:
Calibre e-book library management application: http://calibre-ebook.com/
ScanTailor: http://scantailor.sourceforge.net/
gscan2pdf: http://sourceforge.net/projects/gscan2pdf/
Canon Hack Development Kit firmware: http://chdk.wikia.com
Tesseract: http://code.google.com/p/tesseract-ocr/
Python script of Hacker Space Bruxelles scanner: http://git.constantvzw.org/?
p=algolit.git;a=tree;f=scanbot_brussel;h=81facf5cb106a8e4c2a76c048694a3043b158d62;hb=HEA
D
Sollfrank, Francke & Weinmayr
Piracy Project
2013
Giving What You Don't Have
Andrea Francke, Eva Weinmayr
Piracy Project
Birmingham, 6 December 2013
[00:12]
Eva Weinmayr: When we talk about the word piracy, it causes a lot of problems
to quite a few institutions to deal with it. So events that we’ve organised
have been announced by Central Saint Martins without using the word piracy.
That’s interesting, the problems it still causes…
Cornelia Sollfrank: And how do you announce the project without “Piracy”? The
Project?
E. W.: It’s a project about intellectual property.
C. S.: The P Project.
Andrea Francke, Eva Weinmayr: [laugh] Yes.
[00:52]
Andrea Francke: The Piracy Project is a knowledge platform, and it is based
around a collection of pirated books, of books that have been copied by
people. And we use it to raise discussion about originality, authorship,
intellectual property questions, and to produce new material, new essays and
new questions.
[01:12]
E. W.: So the Piracy Project includes several aspects. One is that it is an
act of piracy in itself, because it is located in an art school, in a library,
in an officially built up a collection of pirated books. [01:30] So that’s the
second aspect, it’s a collection of books which have been copied,
appropriated, modified, improved, which live in this library. [01:40] And the
third part is that it is a collection of physical books, which is touring. We
create reading rooms and invite people to explore the books and discuss issues
raised by cultural piracy.
[01:58] The Piracy Project started in an art college library, which was
supposed to be closed down. And the Piracy Project is one project of And
Publishing. And Publishing is a publishing activity exploring print-on-demand
and new modes of production and of dissemination, the immediacy of
dissemination. [02:20] And Publishing is a collaboration between myself and
Lynn Harris, and we were hosted by Central Saint Martins College of Art and
Design in London. And the campus where this library was situated was the
campus we were working at. [02:40] So when the library was being closed, we
moved in the library together with other members of staff, and kept the
library open in a self-organised way. But we were aware that there’s no budget
to buy new books, and we wanted to have this as a lively space, so we created
an open call for submissions and we asked people to select a book which is
really important to them and make a copy of it. [03:09] So we weren’t
interested in piling up a collection of second hand books, we were really
interested in this process: what happens when you make a copy of a book, and
how does this copy sit next to the original authoritative copy of the book.
This is how it started.
[03:31]
A. F.: I met Eva at the moment when And Publishing was helping to set up this
new space in the library, and they were trying to think how to make the
library more alive inside that university. [03:44] And I was doing research on
Peruvian book piracy at that time, and I had found this book that was modified
and was in circulation. And it was a very exciting moment for us to think what
happens if we can promote this type of production inside this academic
library.
[04:05] Piracy Project
Collection / Reading Room / Research
[04:11]
The Collection
[04:15]
E. W.: We asked people to make a copy of a book which is important to them and
send it to us, and so with these submission we started to build up the
collections. Lots of students were getting involved, but also lots of people
who work in this topic, and were interested in these topics. [04:38] So we
received about one hundred books in a couple of months. And then, parallel to
this, we started to do research ourselves. [04:50] We had a residency in
China, so we went to China, to Beijing and Shanghai, to meet illegal
booksellers of pirated architecture books. And we had a residency in Turkey,
in Istanbul, where we did lots of interviews with publishers and artists on
book piracy. [05:09] So the collection is a mix of our own research and cases
from the real book markets, and creative work, artistic work which is produced
in the context of an art college and the wider cultural realm.
[05:29]
A. F.: And it is an ongoing project.
E. W.: The project is ongoing, we still receive submissions. The collection is
growing, and at the moment here we have about 180 books, here at Grand Union
(Birmingham).
[05:42]
A. F.: When we did the open call, something that was really important to us
was to make clear for people that they have a space of creativity when they
are making a copy. So we wrote, please send us a copy of a book, and be aware
that things happen when you copy a book. [05:57] Whether you do it
intentionally or not a copy is never the same. So you can use that space, take
ownership of that space and make something out of that; or you can take a step
back and allow things to happen without having control. And I think that is
something that is quite important for us in the project. [06:12] And it is
really interesting how people have embraced that in different measures, like
subtle things, or material things, or adding text, taking text out, mixing
things, judging things. Sometimes just saying, I just want it to circulate, I
don’t mind what happens in the space, I just want the subject to be in the
world again.
[06:35]
E. W.: I think this is one which I find interesting in terms of making a copy,
because it’s not so much about my own creativity, it’s more about exploring
how technology edits what you can see. It’s Jan van Toorn’s Critical Practice,
and the artist is Hester Barnard, a Canadian artist. [07:02] She sent us these
three copies, and we thought, that’s really generous, three copies. But they
are not identical copies, they are very different. Some have a lot of empty
pages in the book. And this book has been screen-captured on a 3.5 inch
iPhone, whereas this book has been screen-captured on a desktop, and this one
has been screen-captured with a laptop. [07:37] So the device you use to
access information online determines what you actually receive. And I find
this really interesting, that she translated this back into a hardcopy, the
online edited material. [07:53] And this is kind of taught by this book,
standard International Copyright. She went to Google Books, and screen-
captured all the pages Google Books are showing. So we are all familiar with
blurry text pages, but then it starts that you get the message “Page 38 is not
shown in this preview.” [08:18] And then it’s going through the whole book, so
she printed every page basically, omitting the actual information. But the
interesting thing is that we are all aware that this is happening on Google,
on screen online, but the fact that she’s translating this back into an
object, into a printed book, is interesting.
[08:44]
Reading Room
[08:48]
A. F.: We create these reading rooms with the collection as a way to tour the
collection, and meet people and have conversations around the books. And that
is something quite important to us, that we go with the physical books to a
place, either for two or three months, and meet different people that have
different interests in relation to the collection in that locality. We’ve been
doing that for the last two years, I think, three years. [09:12] And it’s
quite interesting because different places have very different experiences of
piracy. So you can go to a country where piracy is something very common, or a
different place where people have a very strong position against piracy, or a
different legal framework. And I feel the type of conversations and the
quality of interactions is quite different from being present on the space and
with the books. [09:36] And that’s why we don’t call these exhibitions,
because we always have places where people can come and they can stay, and
they can come again. Sometimes people come three or four times and they
actually read the books. And a few times they go back to their houses and they
bring books back, and they said, I’m going to contact this friend who has been
to Russia and he told me about this book – so we can add it to the collection.
I think that makes a big difference to how the research in the project
functions.
[10:06]
E. W.: One of the most interesting events we did with the Piracy collection
was at the Show Room where we had a residency for the last year. There were
three events, and one was A Day At The Courtroom. This was an afternoon where
we invited three copyright lawyers coming from different legal systems: the
US, the UK, and the Continental European, Athens. And we presented ten
selected cases from the collection and the three copyright lawyers had to
assess them in the eyes of the law, and they had to agree where to put this
book in a scale from legal to illegal. [10:51] So we weren’t interested really
to say, this is legal and this is illegal, we were interested in all the
shades in between. And then they had to discuss where they would place the
book. But then the audience had the last verdict, and then the audience placed
the book. [11:05] And this was an extremely interesting discussion, because it
was interesting to see how different the legal backgrounds are, how blurry the
whole field is, how you can assess when is the moment where a work becomes a
transformative work, or when it stays a derivative work, and this whole
discussion.
[11:30] When we do these reading rooms – and we had one in New York, for
example, at the New York Art Book Fair – people are coming, and they are
coming to see the physical books in a physical space, so this creates a social
encounter and we have these conversations. [11:47] For example, a woman stood
up to us in New york and she told us about a piracy project she run where she
was working in a juvenile detention centre, and she produced a whole shadow
library of books because the incarcerated kids couldn’t take the books in
their cells, so she created these copies, individual chapters, and they could
circulate. [12:20] I’m telling this because the fact that we are having this
reading room and that we are meeting people, and that we are having these
conversations, really furthers our research. We find out about these projects
by sharing knowledge.
[12:38]
Categories
[12:42]
A. F.: Whenever we set our reading room for the Piracy Project we need to
organise the books in a certain way. What we started to do now is that we’ve
created these different categories, and the first set of categories came from
the legal event. [12:56] So we set up, we organised the books in different
categories that would help us have questions for the lawyers, that would work
for groups of books instead of individual works. [13:07] And the idea is that,
for example, we are going to have our next events with librarians, and a new
set of categories would come. So the categories change as our interest or
research in the project is changing. [13:21] The current categories are:
Pirated Design, so books where the look of the book has been copied but not
the content; recirculation, books that have been copied trying to be
reproduced exactly as they were, because they need to be circulating again;
transformation, books that have been modified; For Sale Doctrine, so we
receive quite a few books where people haven’t actually made a copy but they
have cut the book or drawn inside the book, and legally you are allowed to do
anything with a book except copy it, so we thought that it was quite important
so that we didn’t have to discuss that with the lawyers; [14:03] Public
Domain, which are works that are already out of copyright, again, so whatever
you do with those books is legal; and collation, books gathered from different
sources, and who owns the copyright, which was a really interesting question,
which is when you have a book that has many authors – it’s really interesting.
Different systems in different countries have different ways to deal with who
owns the copyright and what are the rights of the owners of the different
works.
[14:36]
E. W.: Ahmet Şık is a journalist who published a book about the Ergenekon
scandal and the Turkish government, and connects that kind of mafioso
structures. Before the book could be published he was arrested and put in jail
for a whole year without trial, and he sent the PDF to friends, and the PDF
was circulating on many different computers so it couldn’t be taken. [15:06]
They published the PDF, and as authors they put over a hundred different
author names, so there was not just one author who could be taken into
responsibility.
[15:22] We have in the collection this book, it’s Teignmouth Electron by
Tacita Dean. This is the original, it’s published by Book Works and Steidl.
And to this round table, to this event, we invited also Jane Rolo, director of
Book Works (and she published this book). [15:41] And we invited her saying,
do you know that your book has been pirated? So she was really interested and
she came along. This is the pirated version, it’s Alias, [by] Damián Ortega in
Mexico. It’s a series of books where he translates texts and theory into
Spanish, which are not available in Spanish. So it’s about access, it’s about
circulation. [16:07] But actually he redesigned the book. The pirated version
looks very different, and it has a small film roll here, from Tacita Dean’s
book. And it was really amazing that Jane Rolo flipped the pirated book and
she said, well, actually this is really very nice.
[16:31] This is kind of a standard academic publishing format, it’s Gilles
Deleuze’s Proust and Signs, and the contributor, the artist who produced the
book is Neil Chapman, a writer based in London. And he made a facsimile of his
copy of this book, including the binding mistakes – so there’s one chapter
upside down printed in the book. [17:04] But the really interesting thing is
that he scanned it on his home inkjet printer – he scanned it on his scanner
and then printed it on his home inkjet printer. And the feel of it is very
crafty, because the inkjet has a very different typographic appearance than
the official copy. [17:28] And this makes you read the book in quite a
different way, you relate differently to the actual text. So it’s not just
about the information conveyed on this page, it’s really about how I can
relate to it visually. I find this really interesting when we put this book
into the library, in our collection in the library, and it sat next to the
original, [17:54] it raises really interesting questions about what kind of
authority decides which book can access the library, because this is
definitely and obviously a self-made copy – so if this self-made copy can
enter the library, any self-made text and self-published copy could enter the
library. So it was raising really interesting questions about gatekeepers of
knowledge, and hierarchies and authorities.
[18:26]
On-line catalogue
[18:30]
E. W.: We created this online catalogue give to an overview of what we have in
the collection. We have a cover photograph and then we have a short text where
we try to frame and to describe the approach taken, like the strategy, what’s
been pirated and what was the strategy. [18:55] And this is quite a lot,
because it’s giving you the framework of it, the conceptual framework. But
it’s not giving you the book, and this is really important because lots of the
books couldn’t be digitised, because it’s exactly their material quality which
is important, and which makes the point. [19:17] So if I would… if I have a
project which is working about mediation, and then I put another layer of
mediation on top of it by scanning it, it just wouldn’t work anymore.
[19:29] The purpose of the online catalogue isn’t to give you insight into all
the books to make actually all the information available, it’s more to talk
about the approach taken and the questions which are raised by this specific
book.
[19:47]
Cultures of the copy
[19:51]
A topic of cultural difference became really obvious when we went to Istanbul.
A copy shop which had many academic titles on the shelves, copied, pirated
titles... The fact is that in London, where I’m based, you can access anything
in any library, and it’s not too expensive to get the original book. [20:27]
But in Istanbul it’s very expensive, and the whole academic community thrives
on pirated, copied academic titles.
[20:39]
A. F.: So this is the original Jaime Bayly [No se lo digas a nadie], and this
is the pirated copy of the Jaime Bayly. This book is from Peru, it was bought
on the street, on a street market. [20:53] And Peru has a very big pirated
book market, most books in Peru are pirated. And we found this because there
was a rumour that books in Peru had been modified, pirated books. And this
version, the pirated version, has two extra chapters that are not in the
original one. [21:13] It’s really hard to understand the motivation behind it.
There’s no credit, so the person is inhabiting this author’s identity in a
sense. They are not getting any cultural capital from it. They are not getting
extra money, because if they are found out, nobody would buy books from this
publisher anymore. [21:33] The chapters are really well written, so you as a
reader would not realise that you are reading something that has been pirated.
And that was really fascinating in terms of what space you create. So when you
have this technology that allows you to have the book open and print it so
easily – how you can you take advantage of that, and take ownership or inhabit
these spaces that technology is opening up for you.
[22:01]
E. W.: Book piracy in China is really important when it comes to architecture
books, Western architecture books. Lots of architecture studios, but even
university libraries would buy from pirate book sellers, because it’s just so
much cheaper. [22:26] And we’ve found this Mark magazine with one of the
architecture sellers, and it’s supposed to be a bargain because you have six
magazines in one. [22:41] And we were really interested in the question, what
are the criteria for the editing? How do you edit six issues into one? But
basically everything is in here, from advertisement, to text, to images, it’s
all there. But then a really interesting question arises when it comes to
technology, because in this magazine there are pages in Italian language
clearly taken from other magazines.
[23:14]
A. F.: But it was also really interesting to go there, and actually interview
the distributor and go through the whole experience. We had to meet the
distributor in a neutral place, and he interviewed us to see if he was going
to allow us to go into the shop and buy his books. [23:31] And then going
through the catalogue and realising how Rem Koolhaas is really popular among
the pirates, but actually Chinese architecture is not popular, so there’s only
like three pirated books on Chinese architecture; or that from all the
architecture universities in the world only the AA books are copied – the
Architectural Association books. [23:51] And I think those small things are
really things that are worth spending time and reflecting on.
[23:58]
E. W.: We found this pirate copy of Tintin when we visited Beijing, and
obviously compared to the original, it looks different, a different format.
But also it’s black and white, but it’s not a photocopy of the original full-
colour. [24:23] It’s redrawn by hand, so all the drawings are redrawn and
obviously translated into Chinese. This is quite a labour of love, which is
really amazing. I can compare the two. The space is slightly differently
interpreted.
[24:50]
A. F.: And it’s really incredible, because at some point in China there were
14 or 15 different publishers publishing Tintin, and they all have their
versions. They are all hand-drawn by different people, so in the back, in
Chinese, it’s the credit. So you can buy it by deciding which person does the
best drawings of the production of Tintin, which I thought it was really…
[25:14] It’s such a different cultural way to actually give credit to the
person that is copying it, and recognise the labour, and the intention and the
value of that work.
[25:24]
Why books?
[25:28]
E. W.: Books have always been very important in my practice, in my artistic
practice, because lots of my projects culminated in a book, or led into a
book. And publications are important because they can circulate freely, they
can circulate much easier than artworks in a gallery. [25:50] So this question
of how to make things public and how to create an audience… not how to create
an audience – how to reach a reader and how to create a dialogue. So the book
is the perfect tool for this.
[26:04]
A. F.: My interest in books comes from making art, or thinking about art as a
way to interact with the world, so outside art settings, and I found books
really interesting in that. And that’s how I met Eva, in a sense, because I
was interested in that part of her practice. [26:26] When I found the Jaime
Bayly book, for me that was a real moment of excitement, of this person that
was doing this things in the world without taking any credit, but was having
such a profound effect on so many readers. I’m quite fascinated by that.
[26:44] I'm also really interested in research and using events – research
that works with people. So it kind of creates communities around certain
subjects, and then it uses that to explore different issues and to interact
with different areas of knowledge. And I think books are a privileged space to
do that.
[27:11]
E. W.: The books in the Piracy collection, because they are objects you can
grab, and because they need a place, they are a really important tool to start
a dialogue. When we had this reading room in the New York Art Book Fair, it
was really the book that created this moment when you started a conversation
with somebody else. And I think this is a very important moment in the Piracy
collection as a tool to start this discussion. [27:44] In the Piracy
collection the books are not so important to circulate, because they don’t
circulate. They only travel with us, in a way, or they travel here to Grand
Union to be installed in this reading room. But they are not meant to be
printed in a thousands print run and circulated in the world.
C. S.: So what is their function?
[28:08]
E. W.: The functions of the books here in the Piracy collection are to create
a dialogue, debate about these issues they are raising, and they are a tool
for a direct encounter, for a social encounter. As Andrea said, building a
community which is debating these issues which they are raising. [28:32] And I
also find it really interesting – when we where in China we also talked with
lots of publishers and artists, and they said that the book, in comparison to
an online file, is a really important tool in China, because it can’t be
controlled as easily as online communication. [28:53] So a book is an
autonomous object which can be passed on from one hand to the other, without
the state or another authority to intervene. I think that is an important
aspect when you talk about books in comparison with circulating information
online.
[29:13]
Passion for piracy
[29:17]
A. F.: I’m quite interested in enclosures, and people that jump those
enclosures. I’m kind of interested in these imposed… Maybe because I come from
Peru and we have a different relation to rules, and I’m in Britain where rules
seem to have so much strength. And I’m quite interested in this agency of
taking personal responsibility and saying, I’m going to obey this rule, I’m
not going to obey this one, and what does that mean. [29:42] That makes me
really interested in all these different strategies, and also to find a way to
value them and show them – how when you make this decision to jump a rule, you
actually help bring up questions, modifications, and propose new models or new
ways about thinking things. [30:02] And I think that is something that is part
of all the other projects that I do: stating the rules and the people that
break them.
[30:12]
E. W.: The pirate as a trickster who tries to push the boundaries which are
being set. And I think the interesting, or the complex part of the Piracy
Project is that we are not saying, I’m for piracy or I’m against piracy, I’m
for copyright, I’m against copyright. It’s really about testing out these
decisions and the own boundaries, the legal boundaries, the moral limits – to
push them and find them. [30:51] I mean, the Piracy Project as a whole is a
project which is pushing the boundaries because it started in this academic
library, and it’s assessed by copyright lawyers as illegal, so to run such a
project is an act of piracy in itself.
[31:17]
This method of doing or approaching this art project is to create a
collaboration to instigate this discourse, and this discourse is happening on
many different levels. One of them is conversation, debate. But the other one
is this material outcome, and then this material outcome is creating a new
debate.
Sollfrank & Dockray
Expanded Appropriation
2013
Sean Dockray
Expanded Appropriation
Berlin, 4 January 2013
[00:13]
Public School [00:17]
We decided to give up doing a gallery because… Well, for one, the material
conditions weren’t so great for it. But I think people who open up galleries
do it in really challenging conditions, so there is no reason why we couldn’t
have done a gallery in that basement. [00:37] I think we were actually
disinterested in exhibition as a format. After a few years – I mean, we did
something like 35 things that could easily be called exhibitions, in a span of
5 years leading up to that. [00:55] I think we just wanted to try something
else. And so we already had started a project called The Public School a year
prior, so we decided that we would use our space primarily as a school.
[01:10] At that time those two things happened. We eliminated the gallery and
then ended up with two new galleries and a school instead!
[01:20] What The Public School is… it’s been going now for five fears. It
began just as a structure or even a diagram, or an idea or something. [01:43]
And the idea is that people would propose things that they wanted to learn
about, or to teach to other people. And then there would be a kind of process
where we use our space or the Internet to allow people to sign up to say they
are also interested in this idea. And then the School’s job would be to turn
those ideas into real meetings of people, real classes where people got
together. [02:15] So in that sense the curriculum would be developed in
public. It wouldn't be public just simply in the sense that anyone could go to
it, but it’d be public in the sense that anyone could produce the form of it.
[02:32] And again, I need a lot more time, I think, to talk about all the
dimensions to it, but in broad strokes that’s kind of what it is. [02:43]
Although we started in Los Angeles, in the basement of our original gallery
five years ago, it’s now been in around a dozen cities around the world, where
people are operating according to the same process, and then sometimes in
conversation with one another. And there’ve been 500-600 classes, and 2000 or
so proposals made in that time.
[03:18]
Motivation
[03:22]
It was in the air at the time already, so I don’t think it’d be an entirely
independent impulse – number one. But I had actually tried to start a couple
of things that had failed. [03:41] Like Aaaaarg – I tried to set up some
physical reading groups that would complement the online archive. So, in Los
Angeles the idea would be that we’d meet and talk about things that were being
posted to the website. So, yes, reading groups. But they never really went
anywhere. They were always really small, and they kind of run out of steam
quite quickly because no one was interested. [04:10] So in a way The Public
School was a later iteration of something that I’d already been trying for a
while. But the other thing was that by doing these reading groups,
intuitively, I knew what was wrong. [04:31] Although I like to read, that is
not all of what education is to me. To me learning and education is something
that is more inclusive of a lot more of what we experience in life, than
simply theoretical discussions. The structures didn’t really allow that in a
way. [04:56] The Public School came out of just trying to imagine what kind of
structure would be inclusive to overcome some of those self-imposed
limitations. [05:14] I’m very interested in technology in a hands-on way. I
like to code and electronics – hacking around with electronics. And at the
same time, I like to read and I like to write. And then once you go down that
line then you think, well, I like music a lot and I like to play chess as
well. [05:46] I think about all these things that I like to do, and I just
thought about how a lot of these gestures towards education that I tried to do
previously, in no way embraced me as a whole person. So in that sense, it was
based in personal interest. [06:22] But the other personal interest had to do
with personal motivation, it had to do with running an art space for, at that
point, four years. And actually seeing the way that that happened, because I’m
not a curator. [06:38] And so the act of putting on exhibitions for me was
less about making value judgments, and more about trying to contribute to the
cultural life of my city, and also provide opportunities that didn’t exist in
Los Angeles. [06:57] For example, no one really knew how to show work with
technology, and we were able to, because, for instance I knew how to set up
projectors, fix electronics or get things to start and stop, and that kind of
stuff. [07:13] But over the course of running it, because it is an exhibition
space, I found myself put into the role of being a curator – Fiona and I both
did. And it was kind of an uncomfortable role to be deciding what became
visible and what wouldn’t be. [07:32] And one thing that was never visible was
the sort of mechanisms by which an institution made certain things visible.
[07:40] So the public in The Public School actually in a way is trying to
eliminate that whole apparatus, or at least, put that apparatus as something
that we didn’t want to be solely the ones interacting with. We wanted that
apparatus to be… that our entire community, the community of people who is
participating in the programme – that they were the ones responsible for it.
[08:14] So that would shift programming, but also accountability and all these
things, to the people who are actually participating in the life of the space.
[08:28]
Technical Infrastructure
[08:32]
The technical infrastructure is incredibly important because at the moment
that’s people’s primary experience of the project. They make proposals on the
website, and then the classes are actually organised by people through the
website. So the website, the entire technical infrastructure becomes the
engine for getting events to happen. [09:01] It’s not an essential part. At
the very beginning we did it on paper, and we had the website and the paper
kind of simultaneously. And we’d print things out onto paper that would be
accessible by coming into the space, and vice versa, we'd enter things from
the paper back into the website. [09:26] But at the moment it’s mostly
orchestrated through the website. And it’s been three versions of it, like
three separate pieces of software, and the last two it’s been Kayla Waldorf
and myself who have been programming it. And we have… [09:45] Number one,
we’ve organised lots of classes, so we’re very involved in the life of the
school. And in a way we try to programme the site according to (A) what would
make things work, but (B), like you say, in a way that expresses the politics,
as we see them, of the site. [10:14] And so almost at every level, at every
design decision that Kayla might be making, or every kind of code or database
decision, you know, interactive decision that I might be making – those
conversations and those ideas are finding their way into that. [10:45] And
vice versa, that you see code, in a certain way, as not determining politics,
but certainly influencing what people see as possible and also choices that
they see available to them, and things like that. [11:09] I guess as users of
the site, as organisers of The Public School and as programmers, this kind of
relationship between the project and the software is quite intertwined.
[11:28] And I don’t think that… I think that typically art institutions use a
website as a kind of publicity vehicle, as a kind of postcard or something
that fits into their broadcasting of a programme, as something as a glue
between their space and their audience. [11:49] And I think for us the website
is actually integral to the space and to the audience. There is more of a
continuum between the space, programme, website and audience.
[12:04]
Aaaaarg.org
[12:08]
It started out small. In a way, it was an extension of what I think as a
practice that all of us are familiar with, which is sharing books that we’ve
read, or sharing articles that we’ve read, especially if your work is somehow
in relationship to things that you might be reading. [12:41] In my
architecture school, for instance, we would read lots and lots, and then we’d
be making work in parallel. It wouldn’t be that either would determine the
other, but in the end, there is a strong relationship between the ideas that
you have and what you see as possible, and the things that you are reading.
[13:07] So as part of the student culture, especially among my friends, the
people that I identified with in school, we’d be discovering different parts
of the library independently. And then when we found something that was quite
moving in whatever way then we would photocopy it to keep it for ourselves
later. [13:34] And we’d also give it to each other as a kind of secret tool,
or something like that, you know, like you have the sense that when you found
something that is really good – and specially if other people aren’t even
interested – then you feel really empowered by having access to that, by being
able to read it and reread it. [14:02] And then you feel more empowered when
there is a community of other people. It may be a small one, but who have read
that thing as well, because then you start building a kind of shared frame of
reference, a shared vocabulary and a shared way of seeing the world, and
seeing what you’re working on. [14:22] And I think out of that comes projects,
like you actually work on projects together, you collaborate, you correspond
with other people or you actually share the work. And that’s what happened.
[14:41] I started Aaaaarg.org after I moved from New York to Los Angeles, so I
was quite far away from some of the people that I was working with – and just
continuing with that very basic activity of sharing reading material in order
to have that shared vocabulary to be able to work together.
[15:08]
Content
[15:12]
It turned out to be architecture at the very beginning. But we all had really
broad understandings of what architecture meant and what it included, so there
was a lot of media theory, art history and philosophy, and occasionally some
architecture too. [15:38] And so that became the initial kind of seed. And I
think everything has, as the site expanded from there, to be not just me and
some collaborators, or then collaborators of collaborators, and then friends
of those people, and so on. [16:03] It’s kind of a ripple effect outwards.
What happened was something that is quite common to almost any platform, which
is this kind of feedback. Even in an open structure, it's never truly open.
There’re always rules in place, there’s always a past history, and those two
things go a long way to influence what happens in the future. [16:33] I’m sure
a lot of people will come to the site who are interested in one thing, and
then find nothing in the site that speaks to them, and then disappear. Whereas
other people, the site really spoke to them, and so what they would contribute
can also fit according to that sense, to that inclination.
[16:59]
Dynamics of growth and community-building
[17:04]
Especially when I’m involved in this kind of projects, I don’t like being
alone. Obviously it contributes a lot to the work, not only because there’s
more people, but actually the kind of relationships and negotiations that
happen in that work are interesting in themselves. [17:29] So anyway, it was
never all that interesting for it to be a private library. I mean, we all have
private libraries, but there is this potential as well, which I think wasn’t
part of the project at the beginning, it really was a tool for sharing in a
particular kind of context. [17:56] But I think, obviously, you know, once
people saw it then they saw a sort of potential in it, because you see what
happens on the Internet and you know that in certain cases you can read from
it and you can write to it. [18:18] And you also know that, although there
still [are] various forms of digital exclusion, that it's quite accessible
relative to other forms, other libraries, like university libraries, for
instance.
[18:37]
Cornelia Sollfrank: It’s not just about having access to certain material, but
what is related to it, and what’s really important, is the dynamics of
building a community and the context, and even smaller discourses around
certain issues, which you don’t have necessarily if you just download a text.
Then you have the text but you don’t have somebody to talk to, or you don’t
write your opinion about it to someone. So that’s, I think, what comes with
the project, which makes it very valuable to a lot of people.
[19:13]
Yes. That’s going back to what I was saying about some of the failures before
The Public School, which was... As the site was growing, as Aaaaarg was
growing, all of a sudden there would be things in there that I didn’t know
about before, that someone felt it was important to share. [19:37] And because
someone felt that it was important to share it, I felt it was important to
read it. And I did, but then I wanted to read it with other people. [19:51]
So, some of those reading groups were always attempts to produce some social
context for the theory.
[20:06] Having a library as if the archive itself is the library – but having
that isn't really that interesting to me. What's interesting is having some
social context that I can feel involved in (not that I ‘have’ to be involved
in it), but having some social context to make use of that reading material.
[20:42]
Copyright
[20:47]
At the beginning it was never a component of the project, because of that sort
of natural extension between what I see as a perfectly… something that I think
that we all do already. And especially in architecture and art, if you are
involved in reading you give books to people. Like you gave me your book… And
I’ve passed on a number of books. [21:34] If I print out something to read and
I’m done with it, then I’m more likely to pass it on than I’m to shred it – I
have to keep it in my closet forever, what do I do with it? If I think I’m
truly done with it, even for a moment, then I’m more likely to pass it on.
[22:00] So at the beginning it had nothing to do with piracy, it had
everything to do with wanting to share things with other people. And a lot of
times it's not just in this abstract “I kind of like to share,” but it was
project-based, and I think it became a little bit more abstract. [22:24] But I
think actually over time, when people were sharing things, sometimes they did
it with this sort of abstract recipient of that sharing, and that they would
think, “I have access to this and I know that other people want access to it,
and so that’s going to be why I share it.” [22:46] In other cases, I know that
people were trying to organise a reading group, and this is quite common,
which is that people would be organising something and then how are they going
to distribute the reading material. Yes, they could give everyone a link to
Amazon so they all order their own book, maybe that would be better for
Amazon. [23:13] But there are another ways that they would organise the
reading material there. A lot of times the stuff they wanted to read was
already on Aaaaarg. Sometimes they had to upload a few new things. [23:26] And
so that’s how a lot of it grew and that’s why people are involved. And I think
sharing was what drove the project. And then it really wasn’t for 3 years that
even there was anything even relating to copyright issues. No one complained
for all that time. [23:53] And then when complains came in then, you know, we
responded by taking it down. It was quite simple. [24:05] But then later in
the life of the project, the copyright problems sort of, in a way,
retroactively made the project more about piracy than about sharing.
[24:22]
Attempts to control file-sharing
[24:26]
Either through making activity which used to be legal, illegal, or which used
to be in a kind of grey area because there wasn’t a framework in place for it,
that sort of draw hard lines to say that something in now illegal. [24:46] And
then there is the technological forms of negation, I think, which is to
actually make it impossible for people to do something that they used to be
able to do – signing copies of a file and not allowing it to open if it’s not
opening in the right place, or through the cloud, through this kind of new
marketing opportunities of centralising a lot of files in one place, and then
sort of governing the access through sites like Spotify. [25:29] Amazon does
the same thing, you know, also with their e-books, where they own the device,
the distribution network and the servers. And so by controlling the entire
pipeline, there’s a lot more control over what people do. [25:51] For
instance, you have to jailbreak the Kindle in to order to share a book. Again,
something that we used to be able to do, now we actually have to break the law
or break our devices. [26:05] So these two things, I think, are how it gets
dealt with. And of course, there’s always responses to those things. [26:12] I
think the technological one is a big [one] ... to me that’s the more
challenging one, especially now, because what’s been produced is much more
miniaturised and a lot more difficult to...
C.S.: Hack?
[26:30] Yes. And also you can’t hack the server farm that’s located in, you
know, this really remote part of some country that you’ve never been to.
Shouldn’t say never. In fact, I’ll say never, just to see if someone can.
[26:50] Positive things would be to say, if we take a more expansive view of
the economy, look at who is making money, and then make an appeal for that.
Because there are people who are making money, like Apple is making a lot of
money, and other people who aren’t making money. [27:15] And I don’t think you
can blame the readers, for instance, for the fact that writers and publishers
aren’t making money, because the readers are going into that too, because of
the same forces. [27:28] So you look at who is making the money, and I think
that is a political argument that needs to be made, that this money is
actually being kind of hoarded by some of these companies, because they are
sort of gaming the system and the restructuring of the economy, but also how
we consume entertainment, and all this kind of things, and the restructuring
of production around the globe.
[27:59] I don’t think sites like Aaaaarg do anything more than point out a
kind of dynamic that is existing in the world – to think that somehow you can
sort of turn that into something positive, you know, in a way that gets
capitalism to stop exploiting people – like it seems silly to me, capitalism
exploits people...
[28:31]
Publishing landscape
[28:35]
I think that the role of the publishers [is] already changing, because of the
Internet and because of companies like Amazon, who changed not only selling
books. They changed not only the bookstore, but also changed the entire
distribution model, which then changes the way publishers work – and more and
more, even the entire life cycle of a book, you know, from the writing to the
sort of organisation and communication, to the distribution to the
consumption. [29:09] The entire life cycle of a book is happening through
these networks, from the software that we write it on, and where is that stuff
stored, you know – is a Google Docs or some other thing? –, and our e-mails
that are circulating, and the accounting software. [29:31] A lot of it is
changing through the entire pipeline anyway, so to me, it’s really difficult
to say how publishing is changing because the entire flow, the entire
apparatus is changing.
[29:48] At the beginning, Aaaaarg was a way of bringing readers together, and
to allow readers to sort of give value to certain things that they were
reading. And I think that’s always been a form of publishing to me. [30:09]
Yes, someone is responsible for having the book edited, having it printed it,
distributing it, there’s a huge material expense in all of that. [30:21] But
then you also have the life of the book after it gets to the store. And it
continues to have a life, like sometimes it lives for decades and decades, and
it goes between readers, it goes through sidewalk vendors, and used book
stores, and sits on people’s libraries, and goes to public libraries. [30:44]
And I would say that Aaaaarg is sort of in that part of the life cycle.
[30:54] These platforms become sort of new publishers themselves, but I
haven’t really thought that kind of statement through enough. In a way, if
publishing is to make something public and to create publics, then of course,
that’s something that Aaaaarg has done since the beginning. [31:22] It made
things public to people who maybe didn’t exist for before, and it also
produced communities of people around books – I mean, if that’s what a
publication and a publisher does, then, of course, it kind of does that within
the context of the Internet, and it does that by both using and producing
social relations between people.
[31:50]
Reading / books
[31:54]
I have lots of books, and I buy them from anywhere. I buy them, as much as it
pains me to admit it, I buy them from Amazon, I buy them from bookstores, I
buy them from used books stores, I buy them on the street, I find them in
trash, I’ve photocopied so many parts of books at the library, because they
didn’t circulate or something, or because I only had four hours to look at the
book; I’ve gotten things for my friends, I’ve gotten things from classes that
I used to take when I was a student but I still have. [32:37] And then with
the Internet, then I'd see it on a screen, sometimes I print that out, you
know. I’m not a purist in any way about reading or about books, I’m not
particularly sentimental about ‘the book.’ Even though I love books and I see
what’s nice about them, I think that every sort of form a book takes has its
own kind of… there’s something unique about it. [33:11] Honestly, this kind
of, let’s say, increase in e-Pubs and PDFs hasn’t really changed my
relationship to books at all. It’s the same as it’s always been, which is,
I’ll read it, how I can get it. And maybe there’s slightly now forms, and
sometimes I read on a little… I bought a touchpad when they had a fire sale a
while ago, so I read on that.
[33:44] And maybe I’m making an obvious argument here, but you see, if you've
ever scanned a book you know that it takes time, and you know that you screw
up quite a lot, and sometimes those screw ups find their way in, and the
labour that goes into making a scan finds its way in. [34:02] And it’s only
through really good scans that you can manage to sort of eliminate a lot of
that, a lot of the traces of that labour. But I know that, in the entire
history of Aaaaarg, the files will always show the labour of the person who is
trying to get something up to share it with other people. It’s not a
frictionless easy activity, there is work that’s involved in it. [34:31] And I
find some of the scans were quite beautiful in that way, even when they
weren’t necessarily so good to read.
[34:41] There’s actually, if we go to scale… Again, I have way more books that
I could possibly read, physical books. And I’m going to continue buying more,
acquiring more through my entire life, I’m sure of it. And I think that’s just
part of loving books and loving to read, you have more than you can possibly
deal with. [35:11] And I think, on a level of scale, maybe, with the Internet
we find ourselves, in orders of magnitude, [with] more than we could possibly
deal with. But in a way, it’s the same kind of anxiety, and the limits are
more or less the same. [35:29] But then there are maybe even new opportunities
for new ways of reading that weren’t available before. I could flip through a
book in a certain way, but maybe now with the possibility of indexing the
whole content of a book, and doing searches, and creating ways of visually
displaying books and relationships between books, and between parts of books,
and this kind of things, and also making lists, and making lists with other
people – all of these maybe provide new ways of reading which weren't
available. [36:13] And of course it means that then other ways of reading that
get sort of buried and, you know, lost. And I’m sure that that's true too,
that slow deep reading maybe isn’t as prevalent as different types of
referencing and stuff. [36:32] Not to say that it’s totally identical, but
certainly an evolution. I don’t think that progression is so linear, that it’s
pure loss, or anything like that.
[36:44]
Form and content
[36:49] For me what’s interesting is to try and examine how structure and
form, or structure and content, form and content – I mean, that’s kind of
another on-going question, how structure is not divorced from content.
Structure is not simply a container for the content, any more than the mind
and body are distinct entities – but that the structure that something takes
influences the shape that content takes, and also the ways that people might
approach that context, or use it in this kind of things. And likewise, the
content begins to affect the structure as well. [37:47] Why I’m interested in
structures is because they aren’t deterministic, they don’t determine what’s
going to happen. And all the projects that you mention are things that I think
of, let’s say, as platforms or something, in the sense that they have… they
involve a lot of people quite often, more than just me, and they also have…
the duration is not specified in advance, and what’s going to happen in them
is not specified in advance. [38:30] So they’re experimental in that way, and
they have that in common. And that is what’s interesting to me, is the
production of situations where we don’t know what’s going to happen. [38:51]
And sometimes when focusing on a work you have vision for what that work is
going to be, and then all your work goes into realising that, and, of course,
you have surprises along the way, but then you get something that surprisingly
ends up like what you kind of imagined at the beginning – that way of working
doesn’t really interest me. I sort of become bored pretty early on in that
process. [39:23] Whereas the kind of longer term thing where the initial
conditions actually produce a situation that’s a little unstable, and
therefore what happens is also kind of unpredictable and unstable, to me this
is about opening up other possibilities for things as small as being together
for a short time, but also as big as ways of living.
[40:00] On the one level, these are structural projects, but on another level
they are all kind of structural appropriations in a way, or appropriations of
structures, like from a gallery, a library, a school, another gallery. [40:23]
And I was actually thinking about that I kind of wish that (and I imagine
soon, maybe in the next decade or two) an art historian will make this kind of
argument for evolving the concept of appropriation, to go beyond objects to…
Because in a way appropriation enters into the discourse when reproduction…
[40:52] I think appropriation it’s been something, let’s say, that maybe is a
historical concept. So at certain point in history maybe it even has a
different name, there’s different ways that it happens, there are different
cultural responses to it. [41:09] And I think that in the twentieth century,
especially with mechanical reproduction, appropriation becomes quite clear
what it is, because images or sounds, you know, things became distributed and
available for people to actually materially use. [41:30] And the tools that
people have available to make work as well allow for this type of reuse of
what’s being circulated through the world. [41:45] And I guess what I’m sort
of saying is, if that’s appropriation of objects, then there might even be a
time now, especially as the economy sort of shifted from being simply about
commodity – the production, and sale and consumption of commodities) – to now,
if we try to understand critically the economy now, it’s something that’s much
more complicated – it involves financialization, debt and derivative trading,
and all this kind of things. [42:25] And so, perhaps also if appropriation is
a historical idea, then appropriation also needs to be updated, and this would
mean – for me this would mean appropriation of systems. [42:46] So rather than
the appropriation of what’s been distributed, it’s the appropriation of the
system of distribution. And to me these are also projects that I get excited
about at the moment. [43:04] In a way it also makes sense, because if
photographs were circulating around the world, and that was, you know, a new
thing, to see that sort of imagery circulating in that way, at a certain point
in time a century ago; then now I think we are even having a similar reaction
to something like Facebook, which to me kind comes out of nowhere, and
suddenly it exists in the world as a structure that is organising a certain
part of the activity of, you know, hundreds of millions of people. [43:47] And
so I think, in a way, that’s the level on which maybe we can start thinking of
appropriation, at a level of this kind of large scale systems. But then that
brings up a whole new set of questions, like what do you call that, number
one. Number two, obviously the legal framework that’s in place, obviously that
will cause problems.