postprocessing in Medak, Sekulic & Mertens 2014
nd lift the platen by pressing the large button again.
To scan you can now either use the small button on the controller to lower the platen, adjust and
then press it again to trigger the cameras and lift the platen. Or, you can just make a short press on
the large button to do it in one go.
ATTENTION: When the cameras are triggered, the shutter sound has to be heard coming
from both cameras. If one camera is not working, it's best to reconnect both cameras (see
Section 0), make sure the batteries are charged or adapters are connected, erase all images
and restart.
A mistake made in the photographing requires a lot of work in the post-processing, so it's
much quicker to repeat the photographing process.
If you make a mistake while flipping pages, or any other mistake, go back and scan from the page
you missed or incorrectly scanned. Note down the page where the error occurred and in the postprocessing the redundant images will be removed.
ADVICE: The scanner has a digital counter. By turning the dial forward and backward, you
can set it to tell you what page you should be scanning next. This should help you avoid
missing a page due to a distraction.
While scanning, move the cradle a bit to the left from time to time, making sure that the tip of Vshaped platen is aligned with the center of the book and the inner margin is exposed enough.
II. GETTING THE IMAGE FILES READY FOR POST-PROCESSING
Once the book pages have been photographed, they have to be transfered to the computer and
prepared for post-processing. With two-camera scanners, the capturing process will result in two
separate sets of images -- odd and even pages -- coming from the left and right cameras respectively
-- and you will need to rename and reorder them accordingly, rotate them into a vertical position
and collate t
Display 200 300 400 500 600 700 800 900 1000 ALL characters around the word.